STM32DBG.INI: STM32 Debugger Initialization File

Chek Load application at startup and select Initialization File

File  STM32DBG.INI  for the STLinkV2

/******************************************************************************/
/* STM32DBG.INI: STM32 Debugger Initialization File                           */
/******************************************************************************/
// <<< Use Configuration Wizard in Context Menu >>>                           //
/******************************************************************************/
/* This file is part of the uVision/ARM development tools.                    */
/* Copyright (c) 2005-2007 Keil Software. All rights reserved.                */
/* This software may only be used under the terms of a valid, current,        */
/* end user licence from KEIL for a compatible version of KEIL software       */
/* development tools. Nothing else gives you the right to use this software.  */
/******************************************************************************/
FUNC void DebugSetup (void) {
// <h> Debug MCU Configuration
//   <o1.0>    DBG_SLEEP     <i> Debug Sleep Mode
//   <o1.1>    DBG_STOP      <i> Debug Stop Mode
//   <o1.2>    DBG_STANDBY   <i> Debug Standby Mode
//   <o1.5>    TRACE_IOEN    <i> Trace I/O Enable
//   <o1.6..7> TRACE_MODE    <i> Trace Mode
//             <0=> Asynchronous
//             <1=> Synchronous: TRACEDATA Size 1
//             <2=> Synchronous: TRACEDATA Size 2
//             <3=> Synchronous: TRACEDATA Size 4
//   <o1.8>    DBG_IWDG_STOP <i> Independant Watchdog Stopped when Core is halted
//   <o1.9>    DBG_WWDG_STOP <i> Window Watchdog Stopped when Core is halted
//   <o1.10>   DBG_TIM1_STOP <i> Timer 1 Stopped when Core is halted
//   <o1.11>   DBG_TIM2_STOP <i> Timer 2 Stopped when Core is halted
//   <o1.12>   DBG_TIM3_STOP <i> Timer 3 Stopped when Core is halted
//   <o1.13>   DBG_TIM4_STOP <i> Timer 4 Stopped when Core is halted
//   <o1.14>   DBG_CAN_STOP  <i> CAN Stopped when Core is halted
// </h>
  _WDWORD(0xE0042004, 0x00000027);  // DBGMCU_CR
}
DebugSetup();                       // Debugger Setup

File  conf_STM32F10_SWO.ini   for ULINK2

/*-------------------------------------------------------------------
** Define the function to enable the trace port
**-----------------------------------------------------------------*/
FUNC void EnableTPIU(void) {

  _WDWORD(0xE0042004, 0x00000020);    // Set asynchronuous communication via DBGMCU_CR
}

/*-------------------------------------------------------------------
** Invoke the function at debugger startup
**-----------------------------------------------------------------*/
EnableTPIU();